Table of Contents
Advertisement
Chapter 3 Advanced Operation
7
Input the paper length on the keypad.
Setting range :182.0 to 457.2 mm/7.17 to 18.00
inches
When the numerical value has been input,
press the clear key to clear the value before
inputting.
Example of inputting a value: Input [2500] when the paper length is 250 mm.
8
Press the
key.
The input value will be set.
9
Press the
key.
The procedures taken after that will be the same as the
(p.2-5).
3.
Custom Folding
Custom folding is an operation method to fold
paper at any position by specifying the folding
stopper positions (folding position) of the
folding plates 1 and 2.
The foldable sizes are as follows. (Width x Length)
Maximum : 311 x 457.2 mm/12.24 x 18.00 inches
Minimum : 120 x 182 mm/4.73 x 7.17 inches
The paper sizes which can be used may vary
with the paper type, thickness, and printing
state.
3-8
Chapter 2 "3. Standard Folding of Standard Paper"
<Standard single fold>
Width : 120 to 311/
4.73 to 12.24
Length : 182 to 457.2/
Unit : mm/inches
Paper Size Set
Set
250.0
P Length
250
+0.0/
Ready
<Example of custom single fold>
Paper feed
direction
Paper
7.17 to 18.00
Man
0
Advertisement
Table of Contents
