Table of Contents
Advertisement
Chapter 3 Advanced Operation
7
Press the
key.
Input numerical value is set, and [Fold1]
can be changed.
8
Input [Fold1] using the numerical
keypad.
Input [850].
9
Press the
key.
Input numerical value is set, and [Fold2]
can be changed.
10
Input [Fold2] using the numerical
keypad.
Input [950].
11
Press the
key.
The input numerical value is set, and the
display will return to the top screen.
The procedures taken after that will be the same as the
(p.2-5)
The value of air volume of each fan, paper output amount, and stacker roller position that are
changed during special folding will be registered automatically.
When the registered numerical value has been ine-adjusted
• Press and hold the
the stopper adjustment key. The buzzer sounds "pii" and the numerical value that has been ine-adjusted
is registered.
• When turning of the power without registering the value, the ine-adjusted numerical value will be
cleared.
• Air volume of each fan, paper output amount, and stacker roller position that are changed
during special folding will be registered automatically.
3-2.
Using the registered data
Press the custom folding key to select the
registered data.
3-10
key to register the numerical value after ine-adjusting the registered value using
Irreg Set
Irreg Set
Irreg Set
Chapter 2 "3. Standard Folding of Standard Paper"
01
P Length
297.0
Fold1
0.0
Fold2
0.0
01
P Length
297.0
Fold1
85.0
Fold2
0.0
01
P Length
297.0
Fold1
85.0
Fold2
95.0
Advertisement
Table of Contents
