Formax FD 3200 Instruction Manual page 36

Chapter 2 Basic Operation
17
Select the method of using the counter.
• The counter can be used in two ways "Count
Down" and "Count Up".
Count up : Press the clear key and set
Count down : Enter the number of sheets
• Up to four digits (9999) can be displayed.
• An icon will be displayed by pressing the start key.
Count up
When pressing the clear key, the buzzer sounds "pi", and the count display will return to [0].
When pressing the start key without pressing the clear key, paper folding operation will restart and the
number of sheets processed will be counted up.
The machine will stop operations when the count display shows [9999]. Press the clear key to return
the count display to [0] and press the start key when processing paper folding continuously.
Count down
The machine will stop when the number of sheets set for processing is processed, and the count
display will return to the number of sheets set for processing.
When pressing the clear key, the buzzer sounds "pi", and the use of the counter will return to "Count
up" instead of "Count down".
The count display will return to [0].
When pressing the start key without pressing the clear key, paper folding operation will restart and the
number of sheets processed will be counted down.
After that, the procedures vary depending on the use of the counter.
For counting down, refer to procedure 18.
For counting up, refer to procedure 19.
18
Press the keypad to enter the number
of sheets to be processed.
19
Press the start key to start folding.
• Press the stop key to interrupt or stop
operation. Press the start key again to
restart operation.
• When paper stacked on the paper feed tray runs out,
the machine will stop automatically, and [No Paper]
will be displayed on the LCD display. When paper is
stacked on the paper feed tray, the display of [No Paper]
will disappear, and the machine will be in the stand-by
state.
• When double-feed or paper size error occurs during folding operation, the fed paper is processed
and ejected, but the number of processed sheets will not be counted.
• When paper jams at the paper ejection section, paper may be fed after detecting paper jam at the
paper ejection section, but the number of sheets processed will not be counted.
2-10
the counter to "0" to start
operation.
to be processed on the
keypad to start operation.
+0.0/
Ready
0
Count up
+0.0/
Ready
100
Count down