Formax FD 3200 Instruction Manual page 20

Chapter1 Before Operation
Item
Other Setting Oper Mode
(Operation Mode
Settings)
Test Feed Set
Power Save
Set
Alarm
Setting
Detect OFF
(Detection
OFF Setting)
Default
setting
Idling
Tone
mm/inch Setting
Tray Desc Amt
(Paper Feed Tray
Descending Amount)
1-10
[Normal] [Last Fold][Stopper Fixed] Default: [Normal]
Sets operations of folding stopper on the folding plates 1 and 2,
when the power is turned on.
[Normal] : Start up the machine in the normal setting state, when the
power is turned on.
[Last Fold] : Start up the machine with the same settings as the last
time it was used.
[Stopper Fixed] : Start up in the same conditions at all times.
* : Settings (1 to 3) Default: [2]
Sets the number of sheets to perform test feeding.
Set [ON][OFF] Default: [ON]
Sets the power saving mode to ON or OFF.
Time * : Settings (15 to 60) Sec Default: [30]
Set [ON][OFF] Default: [OFF]
Sets to the alarm (buzzer sound) setting when leaving the machine
unused.
Time * : Settings (5 to 120) Min Default: [60]
Load [ON][OFF] Default: [ON]
(Load
Sets the detection of paper stacked.
Paper)
Speed * : Settings (0 to 6) Default: [5]
Sets the value to be used when the power is turned on. Set to [0] for
folding thin paper mode.
D-Feed [ON][OFF] Default: [OFF]
(Double-
feed)
[ON][OFF] Default: [OFF]
Sets to the idling setting depending on whether to use at the time of
occurrence of mis-feed or double-feed.
[ON][OFF] Default: [ON]
Sets the buzzer to ON or OFF.
[mm][inch] Default: [mm]
Sets the unit to be displayed to [mm] or [inch].
[Not Descend][Small][Normal][Large] Default: [Large]
Sets how far the paper feed tray is lowered.
Details