Table of Contents
Advertisement
10
Set the stack height sensor adjustment
knob to the scale between the irst one
and second one.
11
Press the
or
processing speed to [4].
Set the processing speed for cross fold to [4] or
less. Paper jam may occur depending on the
paper size when performing cross fold with
the processing speed at [4] or more.
12
Check that [D-Feed Detect] is set to [OFF].
13
Check that [Feed Interval] is set to [Normal].
Set [Feed Interval] to [Slow] when mis-feed occurs during folding operation of thick paper.
14
Set to single folding using the folding mode key.
15
Press the test key to test fold.
16
Check the inish.
key to set the
LTR
+0.0/+0.0
Ready
(p.3-20)
(p.3-22)
Chapter 3 Advanced Operation
0
(p.3-22)
3-15
Advertisement
Table of Contents
