Stacking The Paper; Before Stacking Paper; Stacking Paper - Formax FD 3200 Instruction Manual

Chapter 2 Basic Operation
2.

Stacking the Paper

2-1.

Before stacking paper

Checking the front/back,top/end of paper
Check the "front/back" and "top/end" of paper when stacking paper on the paper feed tray.
Check for folding misalignment, and check "front/back" and "top/end" of paper when checking the inished
fold after test folding.
When paper is stacked with the gray surface on the obverse side and white surface on the reverse side on
the paper feed tray, and processing is completed in the standard folding mode, the folded paper is as shown
in the igure.
Single
fold
2-2.

Stacking paper

1
Loosen the guide ixing screw.
2
Stack paper on the paper feed tray.
Push in the paper until the lead edge touches
the shutter below the paper feed inlet slightly.
The round hole (upper side) on the paper feed
guide indicates the maximum paper stacking
height (50 mm/1.97 inches).
2-2
Double Irregular
fold accordion fold-out
Do not put ngers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
Paper feed direction
Letter
Accordion-
fold
fold
Maximum paper
stacking height: 50 mm/1.97 inches
Ejection
direction
Gate fold
50 mm/
1.97 inches