Table of Contents
Advertisement
3.
Names of Control Panel
[15]
[14]
[13]
No.
Name
[1]
LCD display
[2]
key
[3]
(Stopper adjustment) key
[4]
Lamp
[5]
Start key
[6]
Stop key
[7]
Test key
[8]
(Enter) key
[9]
(Cancel) key
[10]
Menu key
[11]
C (Clear) key
[12]
Keypad
[13]
(Custom folding) key
[14]
(Folding mode) key
[15]
Standard folding lamp
[1]
[12]
[11]
Displays the menus or error messages.
Used to change a value.
On the top screen use the
or
key to raise or lower the paper feed tray.
Press to open Stopper adjustment window of folding plates 1 and 2.
When the machine is in the power saving mode, the lamp blinks slowly.
Press to start paper folding.
Press to stop paper folding.
Press to test fold.
Paper thickness can be stored by test folding while double-feed detection is
[ON].
Press to enter the settings. Stopper adjustments can be stored by holding
down this key on the top screen.
Use to cancel setting data.
Forces eject while cancel key and test key are pressed down at the same time.
Forces eject at folding plates while cancel key and clear key are pressed down
at the same time.
Press to display the setting menu window.
Press to cancel the number of sheets to be processed, selected items or
settings.
Use to input numeral value.
Press to select the registered settings of custom folding.
Press to select the folding mode from six standard folding modes. When the
machine is switched on, the single folding mode lamp will light up.
Lighting up will shift to the right every time the key is pressed.
Single folding mode will be performed when custom folding is selected.
Of the six standard folding modes, the lamp of the one selected will light up.
All the lamps will go out when the custom folding mode is
[2]
[3]
[4]
[8]
[10]
[9]
[7]
Function
or
key to change processing speed and the
Chapter1 Before Operation
[5]
[6]
selected.
1-7
Advertisement
Table of Contents
