Table of Contents
Advertisement
2.
Standard Folding of Non-Standard Paper
Standard folding of non-standard paper is a method to register the paper length of paper other than
standard paper, select the standard folding mode, and fold paper.
Paper other than the six standard paper is called non-standard paper. (Five standard paper sizes for North
America)
The foldable sizes are as follows. (Width x Length)
Maximum : 311 x 457.2 mm/12.24 x 18.00 inches
Minimum :120 x 182 mm/4.73 x 7.17 inches
When performing gate fold, the maximum
paper length is 432.0 mm/17.00 inches.
• Standard paper which is stacked on the paper feed tray in the long edge feeding direction is
considered non-standard paper.
• The paper sizes which can be used may vary with the paper type, thickness, and printing
state.
For standard folding, refer to Chapter 2 "3. Standard Folding of Standard Paper" (p.2-5).
1
Press the menu key to display [Paper Size Set].
2
Press the
key.
Setting can be changed at this stage.
3
Press the
key or
4
Press the
key.
The selected details are set.
5
Press the
key to select [P Length].
6
Press the
key.
Setting can be changed at this stage.
key to select [Man].
Chapter 3 Advanced Operation
Width : 120 to 311/
4.73 to 12.24
Length : 182 to 457.2/
Unit : mm/inches
Paper feed
direction
Paper
7.17 to 18.00
Paper Size Set
Set
Auto
457.0
P Length
Paper Size Set
Set
457.0
P Length
Paper Size Set
Set
457.0
P Length
Man
Man
3-7
Advertisement
Table of Contents
