Operation - Formax FD 3200 Instruction Manual

The length of the folded plane (see igure on the right) which
can be folded by folding plates 1 and 2 is restricted.
Folding plate 1 : 42 to 325 mm/1.65 to 12.80 inches
Folding plate 2 : 0 * or 47 to 217 mm/0 * or 1.85 to 8.54 inches
* As folding plate 2 is not used in single folding, it is 0 mm/0 inch.
Incorrectly measuring the paper length or setting the folding stopper position can cause paper
jamming inside the folding plate.
3-1.

Operation

As an example of accordion-fold, operation procedures for custom folding are described with the following
setting.
Paper size : A4 (210 x 297 mm/8.26 x 11.69 inches)
Fold1 : 85 mm/3.34 inches (length A)
Fold2 : 95 mm/3.74 inches (length B)
1
Prepare a folding sample manually
using the paper to be folded.
2
Measure the length of the fold
position of the sample.
3
Press the menu key to display [Irreg Set]
display.
4
Input the registration number using the
numerical keypad or the
[00] cannot be used to input as a registration number.
For the registration number, refer to Chapter 6 "Speciications" (p.6-1).
5
Press the key.
The input registration number is set and [P
Length] can be changed at this stage.
6
Input [P Length] using the numerical
keypad.
Input [2970].
keys.
Chapter 3 Advanced Operation
Length of
folded plane
B
A
Paper feed
direction
Irreg Set 00
P Length
250.0
Fold1
Fold2
Irreg Set 01
P Length
250.0
Fold1
Fold2
01
Irreg Set
P Length
Fold1
Fold2
0.0
0.0
0.0
3-9