Table of Contents
Advertisement
Chapter 3 Advanced Operation
4-2.
Cross fold of non-standard paper
1
Single fold non-standard paper according to the procedure of Chapter 2 "3. Standard
Folding of Standard Paper" (p.2-5).
2
Press the menu key to display [Paper Size Set].
3
Press the
key.
At this stage [Auto] or [Man] can be changed.
4
Set to [Man] with the
5
Press the
key.
6
Measure the length of single-folded
paper.
7
Select [P Length] with the
key.
8
Press the
key.
[P Length] can be changed at this stage.
9
Input the measured numerical value on the keypad.
10
Press the
key.
The input value will be set.
11
Follow procedures 2 to 15 of "4-1. Cross fold of standard paper" (p.3-13).
3-16
key or
key.
key or
Paper Size Set
Set
Auto
P Length
457.0
Paper Size Set
Set
Man
P Length
457.0
Paper feed
direction
Length of single-
folded paper
Advertisement
Table of Contents
