Table of Contents
Advertisement
Chapter 2 Basic Operation
1
Check the paper size display.
The paper size is not displayed if the paper
feed guide is not positioned as speciied even
though the size of standard paper is used. If
not, reset the paper feed guide to a correct
position.
2
Press the fold type key to select the
correct fold.
3
Press the menu key to display [Air
Adjust] window.
4
Select [Sep. Air] using the
5
Press the
key.
At this stage numerical values can be changed.
6
Input numerical values on the keypad
or with the
or
The numerical values can be changed by [5] using the
Setting range: 20 to 99
Refer to "Air Adjustment Table" for appropriate volume of [Sep. Air].
7
Press the
key.
The igures are set.
• The volume of [Sep. Air] can be checked by
pressing the test key or start key while [Air
Adjust] window is displayed.
• Press either of the stop key,
menu key to stop separating air.
• When the air volume is appropriate, the
paper does not lap but it loats as air
reaches the rear end of paper as shown in
the right igure.
2-6
or
key.
key.
key, or
LTR
Ready
Air Adjust
Sep. Air
Pickup Air 40
or
key.
Air Adjust
Sep. Air
Pickup Air 40
+0.0/
0
45
50
Advertisement
Table of Contents
