Table of Contents
Advertisement
4.11.1 Installation
To install the high capacity conveyor belt:
1.
Move the conveyor belt to the correct position.
2.
Connect the adaptor C to the connecting lead.
3.
Connect the mains lead cable to the adapter.
4.
Connect the mains lead cable to the socket outlet.
4.11.2 Operation
The conveyor belt switch has three positions:
•
Mode D: the belt moves in intervals.
•
Mode E: the belt is switched off.
•
Mode F: the belt moves continuously.
4.12
Catch tray
For stacking envelopes leaving from the side exit a catch tray can be mounted.
4.13
Side Exit on the LH Side
In stead of a side exit at the right hand side of the system it is also possible to install a
side exit on the left hand (LH) side.
71
Advertisement
Table of Contents
