Operation - Formax FD 2054 AutoSeal Operator's Manual

OPERATION

1. Place power switch in the ON / "O" position.
2. Extend the catch tray as required.
3. Set the self-centring paper side guides for the width of
the paper and lock in position using thumbscrews.
(Fig 6)
4. Adjust in-feed tray tension lever (Fig 7) for different
paper weights. Move the lever up towards the "-"
symbol for lighter paper and down toward the "+"
symbol for heavier paper. The middle position is for
standard paper weights.
5. Raise the in-feed tray lever to lower the in-feed tray.
(Fig 8)
6. Neatly stack forms on the in-feed tray.
7. Lower the in-feed tray lever to raise the in-feed tray.
Fig. 6
Fig.7
In-feed Tray
Fig.8
5
Self centering side guides
Tension Lever
In-feed Tray Lever