Hard Error Log Fields; Error Code Field Description; Table 14 Hard Error Log Fields - Quantum SuperLoader 3 User Manual

Hard Error Log
Fields 5
Table 14 Hard Error
Log Fields
Field
Time Stamp
Error Code
Context
Error Code Field
Description 5
To Retrieve Hard Error Log Information from SCSI:
To retrieve Hard Error log information from SCSI, execute the Log Sense
command and access log page 7.
Hard Error logs contain three main fields. By interpreting the information
in these fields you can determine how to troubleshoot errors (see
table 14).
Description
The time the event occurred. This field helps correlate the event with a
possible application interruption. If the unit is unable to acquire the
correct time/date from the SNTP time server or the front panel, the
timestamp contains values indicating the power cycle number and the
time an entry was written relative to that power cycle, listed as Power On
Hours (POH).
The unit has no internal real time clock and requires the user to set
Note:
the time of day from the front panel or the network interface
(SNTP).
The type of error and action to which the event is related. This field helps
identify what caused the event to occur (see
The event's software register information.
Error codes appear as 8-character strings made up of either letters or
numbers for a total of 32 bits.
the Hard Error log codes.
SuperLoader User's Guide
Chapter 5 Troubleshooting
Error Code Field
Figure 100 shows the block descriptor for
SuperLoader Error Logs
5
Description).
155