Quantum SuperLoader 3 User Manual page 146

Chapter 4 SuperLoader Operation
Configurations Page
120
To Set a Password:
When you enter your password on the SuperLoader's front panel there is
no associated username. However, when you click any menu heading on
the On-board Remote Management's home page, you are prompted for a
user name and password. The default username and password is
and . The text entry is case sensitive.
guest
With On-board Remote Management, you can set up to four user names
and IDs, which can include both alpha and numeric characters. User
names and IDs must be between four and eight characters long.
1 On any On-board Remote Management page, click
from the banner.
2 On the secondary menu, click
3 From the drop-down list next to
or .
Operator
4 In the field, enter a user name.
Username
5 In the field, enter the new password.
Password
6 In the
Verify Password
7 Click .
submit
To view the list of currently defined users, click
Note:
with
Select User Type
To Set the Authorized Client List:
1 On any On-board Remote Management page, click
from the banner.
2 On the secondary menu, click
SuperLoader User's Guide
.
Security
Select User Type
field, re-enter the same new password.
chosen.
.
Security
4
guest
Configurations
, select
Administrator
submit
4
Configurations