View Firmware Version; View Element Status; Figure 65 Firmware Version Display; Table 7 Firmware Version Description - Quantum SuperLoader 3 User Manual

Chapter 4 SuperLoader Operation
View Status Information
View Firmware
Version 4
Figure 65 Firmware
Version Display
Table 7 Firmware
Version Description
View Element
Status 4
92
To view the current firmware version, use the following procedure.
To View the Firmware Version:
1 On the main menu, scroll to
2 On the Status submenu, scroll to
3 On the SuperLoader submenu, scroll to
list of messages similar to
Firmware: VX.XX
EDC: 8919EE2A
HW & ME Rev: 1 1
Table 7 describes the meaning of each message.
The number indicates the firmware version.
Firmware
The number indicates the
generated when the firmware was installed. The
SuperLoader uses this number to verify that the
EDC
firmware and the memory holding the firmware are
good.
The number indicates the hardware version.
HW Rev
The number indicates the mechanical version.
ME Rev
The element status reports the status of the magazine slots. The status
indicates whether a slot contains a cartridge or not, and which slot is
allocated as the cleaning cartridge's slot.
SuperLoader User's Guide
, then press
Status Enter
, then press
Autoloader
, then press
Version
figure 65 appears.
Error Detection Code
4
.
.
Enter
. A
Enter
that was