Front View; Mailslot; Figure 3 Superloader Front View - Quantum SuperLoader 3 User Manual

Quantum superloader 3: user guide
Hide thumbs Also See for SuperLoader 3:
Table of Contents

Advertisement

Front View

Figure 3 SuperLoader
Front View
Left magazine/blank

Mailslot

1
The mailslot, LCD, function keys, status LEDs, power switch, and left and
right magazines are visible on the front panel of the SuperLoader (see
figure
3).
Mailslot
Status LEDs
Power switch
LCD
The SuperLoader has a manual entry port, the mailslot, which you can
use to load or unload a single cartridge. To maintain security, the mailslot
can be password protected. You can insert a cartridge in the mailslot even
if both magazines are completely filled, so long as the tape drive itself is
empty. You can also pass a tape cartridge from the mailslot to the
magazine if the drive is full but the magazine is not.
You should run an inventory from the host application after
Note:
using the mailslot. The mailslot is not directly available from
the host application.
SuperLoader User's Guide
Right magazine/blank
4 Function keys
Chapter 1 Introduction
Front View
1
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents