Setting The Time Server; Figure 32 Set Ip Server - Quantum SuperLoader 3 User Manual

Chapter 2 Installation and Configuration
Setting Ethernet
Figure 32 Set IP
Server
Setting the Time
Server 2
40
SNMP Server Address
255.255.255.255
4 At each position of the SNMP server address, use the up and down
arrows to change the value of each digit. Press
cursor to the next digit.
If you make a mistake, press
Note:
digit you want to change.
5 When you have advanced through all of the digits of the IP address,
the SuperLoader displays
6 Press .
Enter SNMP Server changed to
not need to reboot the SuperLoader.
7 Press or
Escape Enter
If you locate a time server that is compatible with Simple Network Time
Protocol (SNTP), you can connect the SuperLoader to a server that will
supply the correct date and time. The SuperLoader uses this information
to time stamp information in its memory.
SuperLoader User's Guide
Escape
.
Enter to save
appears on the display. You do
to return to the Ethernet submenu.
to advance the
Enter
to backspace to the