Set The System Time - Quantum SuperLoader 3 User Manual

Chapter 4 SuperLoader Operation
Configurations Page
Set the System
Time 4
114
The element addresses vary depending on which magazine is
configured. If
Left
physically installed, the front panel and On-board Remote Manager
will allow user access to the other magazine, but the SCSI host will
not have access.
To set the Magazine option:
1 On the main menu, scroll to
2 On the
Configuration
options display. A check mark appears after the currently
Magazine
enabled mode.
3 Do one of the following:
• To leave the
Magazine
• To change the
want for the SuperLoader, and then press
are ,
Both Right
The message
change. Enter To Continue
• To leave the setting unchanged, press
• To continue with the change, press
power cycle the tape autoloader and reconfigure the ISV app.
The system time is displayed by the On-board Remote Manager and it is
used internally when logging events and errors (see
page 104).
SuperLoader User's Guide
or is selected, and both magazines are
Right
Configuration
menu, scroll to
Magazines
mode unchanged, press
configuration, scroll to the setting you
Magazine
, and .
Left
This will require a power cycle and an ISV configuration
is displayed.
, then press .
Enter
, then press
Enter
.
Escape
. These settings
Enter
.
Escape
. The message
Enter Please
displays.
Time Display
4
. The
on