Status Information; Default Username And Password; Figure 74 On-Board Remote Management Home Page - Quantum SuperLoader 3 User Manual

Figure 74 On-board
Remote Management
Home Page
Status Information4
Default Username
and Password 4
Status information appears on the right-hand side of the Home page and
every page of On-board Remote Management except the Updates page.
The status information is updated automatically every 60 seconds. So
changes to the status appear in the status window update, but may take
approximately 60 seconds to refresh. You can also click
immediate update on the system.
The menu headings also appear at the top of every page. To access the
functionality under the menu heading, click the menu heading. The first
time that you connect, On-board Remote Management prompts you for
your username and password, then it displays the opening page for that
menu.
The default username for On-board Remote Management is
default password is
guest.
The username and password are case sensitive and should be entered in
all lower case letters. The default username and password are valid if no
usernames have been configured.
SuperLoader User's Guide
Chapter 4 SuperLoader Operation
On-board Remote Management
Click Status to update the status information.

Status Information

to get an
Status
. The
guest
103