Diagnostics Using On-Board Remote Management - Quantum SuperLoader 3 User Manual

Diagnostics Using
On-board Remote
Management 6
• Picker Test
• Magazine Test
• Inventory Test
• Drive Read Test (only runs on SDLT)
• Drive Write Test (only runs on SDLT)
• Drive Read/Write Test
On-board Remote Management allows you to request all
Note:
diagnostic tests, but any tests that require a cartridge to be
inserted will time-out unless someone manually inserts the
cartridge at the appropriate time.
Many tests can be run using On-board Remote Management.
To Perform the On-board Remote Management Diagnostic Tests:
The Drive Read Test, Drive Write Test, and Drive Read/Write
Note:
Tests require that a cartridge be present in the drive before the
test is run (see
The Drive Read Test and the Drive Write Test are only
Note:
available on units that use SDLT drives.
1 Open a web browser and connect to the SuperLoader. The On-board
Remote Management main menu appears.
2 Click the
Diagnostics
3 Type an administrator username and a password, then click
The Diagnostics submenu appears.
4 Select the test you wish to perform from the Diagnostics drop-down
menu, then click
submit.
test is running, you can view the status of the test. Under
Diagnostic Test Progress
SuperLoader User's Guide
On-board Remote Management Diagnostic Tests
Insert a Single Cartridge
tab. A login window appears.
The selected diagnostic test runs. While the
, click,
View Status
Chapter 6 Diagnostics
on page 78).
Enter
View
.
6
.
227