Use Of Magazines And Magazine Blanks; Eject A Magazine - Quantum SuperLoader 3 User Manual

Chapter 4 SuperLoader Operation

Use of Magazines and Magazine Blanks

Use of Magazines and Magazine Blanks

Eject a Magazine

4
82
The SuperLoader will not run unless both magazine openings are
properly closed. One way that you can close the openings is to use two
magazines. If you use only one magazine, then you must fill the other
magazine opening with a magazine blank for the unit to become
operational. For more information on changing magazines and blanks,
refer to the SuperLoader Magazine Installation and Configuration Quick Start
Guide .
Magazines, magazine blanks, and magazine handles are not
Note:
interchangeable between the SuperLoader DLT and the
SuperLoader LTO. Please order the appropriate part numbers
when replacing these items.
When removing magazines or blanks, be certain that no
Caution:
robotic operations are in process. Failure to do so will stop
the robot.
When you want to remove several cartridges at once, eject the
magazine(s) first.
To Eject a Magazine:
1 On the main menu, scroll to
2 On the Commands submenu, scroll to
3 On the Eject submenu, scroll to
then press . You will hear a distinctive popping sound as the
Enter
appropriate magazine is ejected from the SuperLoader.
has been ejected or Right magazine has been ejected
To prevent damage to the SuperLoader or the
Caution:
magazine, use both hands when removing the
magazine from the SuperLoader, supporting the
entire length of the magazine.
SuperLoader User's Guide
, then press
Commands
, then press
Eject
or
Right Magazine
appears on the LCD.
4
4
.
Enter
.
Enter
,
Left Magazine
Left magazine