Setting The Date And Time - Quantum SuperLoader 3 User Manual

Setting the Date and Time

Quantum SuperLoader 3 User's Guide
3 From the
Time
The
Time Zone
cursor automatically appears at the first digit.
4 Scroll to set the number of hours difference between your local time
and Greenwich Mean Time (GMT).
5 Scroll to set the number of minutes difference between your local
time and GMT, then press
6 Press
Escape
To set the date and time:
5
1 From the main menu, scroll to
2 From the
Configuration
3 From the
Time
The
Date/Time
The cursor automatically appears at the first digit.
4 The first four digits represent the current year. At each position of the
year, use the up and down arrows to change the value of each digit.
Press
Enter
5 The next two digits represent the current month. At each position of
the month, use the up and down arrows to change the value of each
digit. Press
6 The next two digits represent the current day. At each position of the
day, use the up and down arrows to change the value of each digit.
Press
Enter
7 The next two digits represent the current hour. At each position of the
hour, use the up and down arrows to change the value of each digit.
Press
Enter
8 The last two digits represent the current minute. At each position of
the minute, use the up and down arrows to change the value of each
digit. Press
9 Press
Enter
10 Press
Escape
submenu, scroll to
screen appears, allowing you to set the hours. The
Enter
or as necessary to return to the main menu.
Enter
Configuration
menu, scroll to
submenu, scroll to
screen appears, allowing you to set the date and time.
to advance the cursor to the next digit.
to advance the cursor to the next digit.
Enter
to advance the cursor to the next digit.
.
to advance the cursor to the next digit.
Enter
to save.
as necessary to return to the main menu.
Chapter 5 Administration
, and then press
Set Timezone
. The new time zone is set.
, and then press
, and then press
Time
, and then press
Set Date/Time
Setting Ethernet
.
Enter
.
Enter
.
Enter
.
Enter
75