Figure 18 Connecting Support
Brackets
Quantum SuperLoader 3 User's Guide
b Install four screws (two per side) to secure the support brackets
to the autoloader brackets (see
Screws
7 Verify that the autoloader is level. Adjust as needed.
8 When the autoloader is level, tighten all screws securing the
autoloader to the rack. This includes the following:
•
Four screws securing the autoloader tabs to the front rails.
•
Four screws securing the support brackets to the rear rails.
•
Four screws securing the autoloader brackets to the support
brackets.
Chapter 7 Customer Replaceable Units (CRUs)
Rack Mounting the Autoloader
figure
18).
Support bracket
Autoloader
bracket
101