Setting Magazines; Setting Passwords - Quantum SuperLoader 3 User Manual

Setting Magazines

Setting Passwords

Quantum SuperLoader 3 User's Guide
In some cases, autoloader owners were being charged Independent
Software Vendor (ISV) licensing fees for two-magazine SuperLoader 3s
although only one magazine was configured. This occurred because the
ISV software was registering the autoloader as a two-magazine device,
regardless of the number of magazines configured. You have the ability
to set the number of magazines in the autoloader.
To set the number of magazines:
1 From the main menu, scroll to
2 From the
Configuration
.
Enter
3 From the
Magazines
the magazines installed in the autoloader.
Many operations on the autoloader are password-protected to ensure
data integrity. You can set passwords to administrator level and to
operator level. Operator-level users have access to the
menus. Administrator-level users have access to all functionality.
Status
To set a password:
1 From the main menu, scroll to
2 From the
Configuration
.
Enter
3 To set a password to the operator level, scroll to
password to the administrator level, scroll to
press . The
Enter Set Password
4 Press . If you are not logged in as Administrator, press
Enter
again to log in. A text box appears above the first asterisk.
Configuration
menu, scroll to
Magazines
menu, select either
Right
Configuration
menu, scroll to
Set Password
screen appears.
Chapter 5 Administration
Setting Magazines
, and then press
Enter
, and then press
, , or to indicate
Left Both
and
Commands
, and then press
Enter
, and then press
. To set a
Operator
, then
Administrator
Enter
.
.
79