Fibre Channel Interface; Sas Interface - Quantum SuperLoader 3 User Manual

Fibre Channel Interface

SAS Interface

Quantum SuperLoader 3 User's Guide
10 Install the device drivers (see
on page 24.
Installing the Fibre Channel autoloader consists of the following steps,
2
which are explained in more detail later in this section:
1 Prepare to install your new Quantum SuperLoader 3 autoloader (see
"Choosing a Location"
2 Identify the accessories that come with the autoloader (see
"Accessories"
3 Install the autoloader in a computer rack or select a table or desktop
near the host server. If installing a rack mount unit, refer to
Mounting the Autoloader"
4 Attach the Fibre Channel cable to the autoloader and a Fibre Channel
switch or the server's Fibre Channel host adapter (see
Fibre Channel and Power Cables"
5 Attach the power cable to the autoloader and plug in the power cable
to the nearest power outlet (see
Power Cables"
passes the power on self-test (POST).
6 Install the device drivers (see
on page 24).
Installing the Serial Attached SCSI (SAS) autoloader consists of the
2
following steps, which are explained in more detail later in this section:
1 Prepare to install your new Quantum SuperLoader 3 autoloader (see
"Choosing a Location"
2 Identify the accessories that come with the autoloader (see
"Accessories"
3 Install the autoloader in a computer rack or select a table or desktop
near the host server. If installing a rack mount unit, refer to
Mounting the Autoloader"
4 Attach the SAS cable to the autoloader and a Fibre Channel switch or
the server's Fibre Channel host adapter (see
Power Cables"
Chapter 2 Installation and Configuration
"Windows Operating System Support"
on page 10).
on page 14).
on page 93.
on page 19).
"Connecting Fibre Channel and
on page 19). Power the autoloader on to ensure it
"Windows Operating System Support"
on page 10).
on page 14).
on page 93.
on page 21).
Installation Overview
"Rack
"Connecting
"Rack
"Connecting SAS and
8