Setting The Subnet Mask - Quantum SuperLoader 3 User Manual

Setting the Subnet Mask

Quantum SuperLoader 3 User's Guide
To set a static IP address:
1 From the main menu, scroll to
2 From the
Configuration
3 From the
Ethernet
4 Scroll to
Static IP
appears at the first digit.
5 At each position of the IP address, use the up and down arrows to
change the value of each digit. Press
the next digit.
When you have advanced through all of the digits of the IP address,
the autoloader displays
If you make a mistake, press
Note:
digit you want to change.
6 Press
Enter
now in effect. You do not need to reboot the autoloader.
7 Press
Escape
Creating a subnet mask is a method of splitting IP networks into a series
5
of subgroups, or subnets, to improve performance or security.
To set a subnet mask:
1 From the main menu, scroll to
2 From the
Configuration
3 From the
Ethernet
.
Enter
4 At each position of the Subnet Mask address, use the up and down
arrows to change the value of each digit. Press
cursor to the next digit.
When you have advanced through all of the digits of the subnet mask
address, the autoloader displays
Note: If you make a mistake, press
digit you want to change.
Configuration
menu, scroll to
submenu, scroll to
, and then press
Enter to save
. The submenu appears and the static IP is
Configuration
or to return to the Ethernet submenu.
Enter
Configuration
menu, scroll to
submenu, scroll to
Chapter 5 Administration
, and then press
, and then press
Ethernet
, and then press
Set IP
. The cursor automatically
Enter
to advance the cursor to
Enter
.
to backspace to the
Escape
, and then press
, and then press
Ethernet
, and then press
Set Subnet Mask
to advance the
Enter
Enter to save.
to backspace to the
Escape
Setting Ethernet
.
Enter
.
Enter
.
Enter
.
Enter
.
Enter
73