Getting Lost Passwords - Quantum SuperLoader 3 User Manual

Getting Lost Passwords

Quantum SuperLoader 3 User's Guide
In the text box, scroll to the first character of the password. The cursor
automatically appears at the first number of the password.
5 At each position of the password, use the up and down arrows to
change the value of each number. Press
the next number.
Note: If you make a mistake, press
digit you want to change.
6 Press
Enter
text box appears above the next asterisk.
7 Repeat steps
When you have entered six numbers, the autoloader displays
below the asterisks.
Password
8 Press
Enter
appears on the LCD.
9 Press
Enter
can either enter another password, or press
necessary to return to the main menu.
If you forget the administrator-level password, you cannot access the
5
autoloader's functionality to enter a new password. In this case, you must
call customer support. When you call, have the autoloader connected to
the Ethernet and open On-board Remote Management.
Note: You can reset front panel passwords to the factory defaults
from On-board Remote Management. However, if the On-
board Remote Management passwords are lost, you must
contact customer support. If you must contact customer
support, be at the host computer with On-board Remote
Management on line. From the main screen, click
Configuration
screen displays. The customer support representative will
need the number surrounded by asterisks to locate and reset
your password. This is your "realm number."
. The text box above the asterisk disappears and another
5 and 6 to enter the remaining digits of the password.
to submit the password.
. The Operator and Administrator options reappear. You
. The enter
Network Password
Chapter 5 Administration
Setting Passwords
to advance the cursor to
Enter
to backspace to the
Escape
Password Successfully changed
or
Escape Enter
or
User name
Submit
as
80