Viewing Element Status; Table 4 Firmware Version Fields - Quantum SuperLoader 3 User Manual

Table 4 Firmware Version
Fields

Viewing Element Status

Quantum SuperLoader 3 User's Guide
Field
Firmware
EDC
HW Rev
ME Rev
The element status reports the status of the magazine slots. The status
3
indicates whether a slot contains a cartridge or not, and which slot is
allocated as the cleaning cartridge's slot. To view an element's status:
1 From the main menu, scroll to
2 From the
Status
3 From the
Autoloader
press
Enter
4 Press
Enter
You can scroll through each of the slots. Slots that are occupied by a
data cartridge are indicated by an asterisk (
assigned to a cleaning cartridge is indicated with an exclamation
point ( ). The slot that is occupied by a cleaning cartridge is indicated
!
with an at sign (
5 Scroll to the slot containing the cartridge for which you want to see
the label, or the cartridge you want to move, and then press
The
Element Status
cartridge. A move command also displays on the screen.
The
Note:
disabled or if you are logged in as Administrator or
Operator.
Description
The number indicates the firmware version.
The number indicates the Error Correction Code that
was generated when the firmware was installed. The
autoloader uses this number to verify that the
firmware and the memory holding the firmware are
good.
The number indicates the hardware version.
The number indicates the mechanical version.
Status
submenu, scroll to
submenu, scroll to
.
.
).
@
screen displays the bar code label for that
command displays only if the security is
Move
Chapter 3 Operating the Autoloader
Viewing Status Information
, and then press
Enter
, and then press
Autoloader
, and then
Element Status
). The empty slot that is
*
.
.
Enter
.
Enter
43