Viewing Status Information; Default Username And Password; Time Display - Quantum SuperLoader 3 User Manual

Viewing Status
Information
Default Username and
Password

Time Display

Quantum SuperLoader 3 User's Guide
The
Home
When using the On-board Remote Management page with
Note:
Microsoft Internet Explorer, be sure to enable the
META REFRESH
On Internet Explorer version 6.0, this feature is controlled
through the
the
Status information displays on the right-hand side of the
4
every page of On-board Remote Management except for the
page. The status information is updated every 10 seconds. Changes to the
status appear in the status window update, but may take approximately
60 seconds to refresh. You can also click
immediate update of the system.
The menu headings also appear at the top of every page. To access the
functionality under the menu heading, click the specific menu heading.
The first time that you connect, On-board Remote Management prompts
you for your username and password, then displays the opening page for
that menu.
The default username for On-board Remote Management is
4
default password is
The username and password are case sensitive and should be entered in
all lower case letters. The default username and password are valid if no
usernames have been configured.
The time displayed is either regular time or power-on time. Regular time
4
is Month/Date/Year time, such as
Power On Cycles (POC)/Power On Hours (POH), such as
POH:00002:07:45
• POC (5-digit number) is the number of times the system has booted
since it was manufactured.
• POH is the number of hours, minutes, and seconds that the system
has been on since the current boot occurred.
Chapter 4 On-board Remote Management
On-board Remote Management Overview
page displays in your browser window.
option.
Tools>Internet Options
tab.
Security
.
guest
Nov/21/2004 19:28
.
menu selection under
Home
Updates
to get an
Refresh Status
guest
. Power-on time is
POC:00121,
Allow
page and
. The
49