Ejecting A Single Cartridge - Quantum SuperLoader 3A Series User Manual

Ejecting a Single
Cartridge
Quantum SuperLoader 3A Series User's Guide
If you select a location that is already occupied,
appears on the LCD. Choose a different location.
When you want to remove a single cartridge from the autoloader, you
2
can specify the cartridge you want by bar code or location, or choose the
cartridge currently in the tape drive.
To eject a cartridge by bar code (if you have a bar code reader):
1 From the main menu, scroll to
2 From the
Commands
3 From the
Eject
press
Enter
4 Scroll to
By Barcode
A bar code label displays.
5 Scroll to the label that corresponds to the cartridge you want to eject.
Press
Enter
To eject a cartridge by location:
1 From the main menu, scroll to
2 From the
Commands
3 From the
Eject
press
Enter
4 Scroll to
By Location
Slots that are occupied by a data cartridge are indicated by an asterisk
( ). The slot that is occupied by a cleaning tape is indicated with an
*
sign, if
Auto Clean
cartridge you want to eject.
5 Press
Enter
The cartridge you want is ejected from the mailslot.
Commands
submenu, scroll to
submenu, scroll to
.
.
.
Commands
submenu, scroll to
submenu, scroll to
.
.
is enabled. Scroll to the slot containing the
.
Chapter 2 Operating the Autoloader
Using Cartridges
Destination Full
, and then press
, and then press
Eject
scroll to
Tape, Mailslot
, and then press
, and then press
Eject
, scroll to
Tape Mailslot
2
.
Enter
.
Enter
, and then
2
.
Enter
.
Enter
, and then
@
20