Tape Drive Status; Table 5 Drive Status Fields - Quantum SuperLoader 3A Series User Manual

Tape Drive Status

Table 5 Drive Status Fields

Quantum SuperLoader 3A Series User's Guide
5 Scroll to the slot containing the cartridge for which you want to see
the label, or the cartridge you want to move, and then press
The
Element Status
cartridge. A
The
Note:
disabled or if you are logged in as
Operator
If you want to move the cartridge, scroll until the location you want
to move to appears under
want to move the cartridge, press
To view the tape drive status, use the following procedure.
2
1 From the main menu, scroll to
2 From the
Status
3 From the
Drive
A list of messages displays. These messages may include:
Field
SCSI ID
Loader LUN
Compr
Drive Tape
screen displays the bar code label for that
command also displays on the screen.
Move
command appears only if the security is
Move
.
, and then press
To:
Status
submenu, scroll to
submenu, scroll to
Description
Not used in the 3A Series autoloader.
Not used in the 3A Series autoloader.
Indicates whether the tape drive compression is
enabled or disabled.
Indicates whether the tape drive is present or not.
Chapter 2 Operating the Autoloader
Viewing Status Information
Administrator
. If you do not
Enter
.
Escape
, and then press
Enter
, and then press
Drive
, and then press
Status
.
Enter
or
.
.
Enter
.
Enter
28