Diagnostic Tests From The Front Panel; Setting The Security - Quantum SuperLoader 3A Series User Manual

Diagnostic Tests from the Front Panel

Setting the Security

Quantum SuperLoader 3A Series User's Guide
Diagnostic tests allow you to calibrate parts of the autoloader, check the
condition of parts, or test the autoloader's functionality. From the front
panel, you can perform all of the diagnostic tests. Because certain tests
require you to manually insert a cartridge, you can perform only some of
the diagnostic tests using On-board Remote Management (see
Remote Management Diagnostic Tests
Note: On-board Remote Management allows you to request all
diagnostic tests, but any tests that require a cartridge to be
inserted will time-out unless someone manually inserts the
cartridge at the appropriate time.
When you enable the security function, the diagnostic tests are password
5
protected to ensure data integrity. To access any of the diagnostic tests,
you must first enter an
password, you will be prompted to enter the password when you
attempt to perform a diagnostic test.
To enter an
Administrator
1 From any menu, click the
displays.
2 On the
Command
Enter.
3 On the
Enter Password
press
Enter
The screen displays with a row of asterisks. A text box displays
Login
above the first asterisk.
4 In the text box, scroll to the first number of the password, and then
press
Enter
text box displays above the next asterisk.
5 Repeat step 4
Note: Press
necessary.
Administrator
password:
Commands
submenu, scroll to
submenu, scroll to
.
. The text box above the asterisk disappears and another
to enter the remaining numbers of your password.
to backspace to a previous text box, if
Escape
Chapter 5 Troubleshooting
Diagnostic Tests from the Front Panel
).
password. If you do not enter the
heading. The
Commands
, and then press
Enter Password
Administrator
On-board
screen
, and then
73