Setting Passwords - Quantum SuperLoader 3A Series User Manual

Setting Passwords

Quantum SuperLoader 3A Series User's Guide
3 To change the option, press
was set to
Many operations on the autoloader are password-protected to ensure
2
data integrity. You can set passwords to administrator level and to
operator level. Operator-level users have access to the
menus. Administrator-level users have access to all functionality.
Status
To set a password:
1 From the main menu, scroll to
2 From the
Configuration
.
Enter
3 To set a password to the operator level, scroll to
password to the administrator level, scroll to
press
Enter
4 Press
Enter
again to log in. A text box displays above the first asterisk.
In the text box, scroll to the first character of the password. The cursor
automatically appears at the first number of the password.
5 At each position of the password, use the up and down arrows to
change the value of each number. Press
the next number.
Note: If you make a mistake, press
digit you want to change.
6 Press
Enter
text box displays above the next asterisk.
7 Repeat steps
When you have entered six numbers, the autoloader displays
below the asterisks.
Password
8 Press
Enter
appears on the LCD.
9 Press
Enter
can either enter another password, or press
necessary to return to the main menu.
Enter
, it is now set to
On Off
Configuration
menu, scroll to
. The screen displays.
Set Password
. If you are not logged in as
. The text box above the asterisk disappears and another
5 and 6 to enter the remaining digits of the password.
to submit the password.
. The and
Operator Administrator
Chapter 2 Operating the Autoloader
Configuring the Autoloader
. For example, if the security option
, and no check mark displays.
Commands
, and then press
, and then press
Set Password
Operator
Administrator
, press
Administrator
to advance the cursor to
Enter
to backspace to the
Escape
Password Successfully changed
options reappear. You
or
Escape
and
.
Enter
. To set a
, then
Enter
Submit
as
Enter
15