Figure 6 Removing The Screws From The Handle - Quantum SuperLoader 3A Series User Manual

Figure 6 Removing the Screws
from the Handle
Quantum SuperLoader 3A Series User's Guide
2 Unsnap the handle carefully, being careful not to break the hinge.
3 Rotate the magazine 180 degrees so that what was the front of the
magazine is now the back.
4 Attach the appropriate left or right handle to the front of the rotated
magazine.
5 Snap the handle back onto the front of the magazine.
6 Install the two screws to attach the handle securely to the magazine.
Changing the Orientation of a Magazine Blank
1 Remove the two screws that attach the handle to the front of the
magazine blank.
2 Unsnap the handle carefully, being careful not to break the hinge.
3 Rotate the magazine blank 180 degrees so that what was the front of
the magazine is now the back.
4 Add the appropriate right or left handle to the front of the rotated
magazine blank.
5 Snap the handle back on the front of the magazine blank.
6 Install the two screws to attach the handle securely to the magazine
blank.
Chapter 4 Customer Replaceable Units (CRUs)
Replacing a Magazine or Magazine Blank
Screws
4
53