Barcode Scanner - Quantum Scalar 218FC User Manual

Barcode Scanner

Enables/disables the barcode scanner. If disabled, the Initialize Scan Barcodes, Configuration Menu
parameter (see above), and the Scan Barcodes sub-function of the Map Slots Diagnostics Menu function
(see Appendix B), is ignored. If disabled, the barcode scanner is not available to the application
software.
To disable the barcode scanner use the UP or DOWN keys to select "N". Press ENTER to execute
the change.
ENABLE BARCODE SCANNER default setting is Y.
Verify SCSI Bus
Verifies that the SCSI devices within your Scalar 218FC (the library robotics and the drives) are
connected to a single SCSI channel. Some network operating systems need to know if the Scalar 218FC
SCSI devices are connected to more than one SCSI channel.
To verify that the SCSI devices are connected to more than one SCSI channel use the UP or
DOWN keys to select "N". Press ENTER to execute the change.
VERIFY SCSI BUS default setting is Y.
52 Equipment Description
Note
Note