Quantum Scalar 218FC User Manual page 30

Click on OK. The Com PORT Properties dialog box appears:
9.
Set your port settings to those shown in this dialog box:
Bits per second (baud rate)
Data bits
Parity
Stop bits
Flow control
10. Click on OK.
11. Repeatedly press ENTER on the host computer until the Configuration Program main menu appears in
the command prompt area of HyperTerminal; The Build Level is the firmware level of the fibre channel
subsystem:
ADIC FCR100/CP4100 Fibre Channel/SCSI Router Configuration
Build Level: a9802
1) Perform Configuration
2) Do a Trace Dump
3) Reboot
4) Download a New Revision of the Firmware
Command >
20 Configuring the Fibre Channel Subsystem
9600 (default), 19200, 38400, 57600, or 115200
8
None
1
None