Quantum Scalar 218FC User Manual page 91

One of the most valuable features of the Scalar Library is the extensive built-in diagnostics. In this
Appendix we discuss each of the Diagnostic functions available through the front panel keypad.
The following functions are available under the Diagnostics Menu:
Open Drive Door
Firmware Revision
Pos Picker at Slot
Pos Picker at Drv
Pick From Mbox
Place In Slot
Place In Drv
Operation Log
Display Sensors
We highly recommend that these diagnostic functions be used only by a
qualified service technician (or on the instruction of a qualified technician).
Some of these functions assume that the unit has been set up correctly and
thus many of the normal built-in safety checks are turned off. Misusing
these diagnostic functions without the normal safety checks could result in
improper operation (or even damage to media or the Scalar Library).
Open Drive Door
The Open Drive Door function will cause the Scalar Library to open the door of the selected drive. If
the door is already open the drive door motor will run for a short time. If a tape is present in the drive,
Close Drive Door
Map Slots & Drives
Pos Picker at Mbox
Pick From Slot
Pick From Drv
Place In Mbox
Event Counters
Calibrate Position
Run Demo
Warning
Diagnostics Menu 81