Quantum Scalar 218FC User Manual page 29

For this example we will name our Hyperterminal FCR 100 and select the Dial-in icon:
6.
Click on OK. Now the Phone Number dialog box appears.
7.
You do not have to enter a phone number, since you will be connecting directly through your serial port.
From the Connect using: pull-down menu, select the communications port assigned to your serial
8.
port.
This example uses COM2 for the serial port. You may use any
serial port that supports baud rates of at least 9600 bits per
second.
Note
Configuring the Fibre Channel Subsystem 19