New Firmware Revisions - Quantum Scalar 218FC User Manual

2. Press 1 to perform a trace dump for the current Scalar 218FC boot cycle, or press 2 to trace the previous
boot cycle. The resulting display will be similar to the following, depending upon the trace levels set
during configuration.
399 ms 936 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 937 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 936 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 937 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 936 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 937 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 936 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 937 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 935 us Init Timer went off!
0 ms 23 us Trying to go on-line!
399 ms 939 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 936 us Init Timer went off!
0 ms 24 us Trying to go on-line!
399 ms 935 us Init Timer went off!
0 ms 23 us Trying to go on-line!
399 ms 938 us Init Timer went off!

New Firmware Revisions

The Scalar 218FC uses a serial connection and the XMODEM protocol to update the firmware.
1.
Press 4 (Download a New Revision of the Firmware) in the Configuration Program main menu. The
following prompt will be displayed:
Download Firmware Menu
Build Level: a9802
This will replace the current revision of the firmware.
A reboot will also be performed as part of this process.
Are you sure (Y/N)?
2. Press Y to download the firmware revision and reboot the Scalar 218FC.
38 Configuring the Fibre Channel Subsystem
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!
Restart initialization...!