Quantum Scalar 218FC User Manual page 97

The Pick From Drive function will cause the drive to unload and eject the cartridge and the Media
Picker to pick the cartridge in preparation to placing the cartridge either in a storage slot or in a Mailbox
slot.
Use LEFT or RIGHT to select the desired field. Select the row or slot using UP or DOWN. Press
ENTER to activate.
dd = Drive number (01 - 02)
Place In Slot
The Place In Slot function will cause the Media Picker to place the cartridge into a storage slot. The
maximum slot number is dependent upon the setting of ADJUST SLOT COUNT under the
Configuration Menu.
Use LEFT or RIGHT to select the desired field. Select the row and slot using UP or DOWN. Press
ENTER to activate.
ss = Slot number (01 – 17, 01 – 16 if ADJUST SLOT COUNT set to 16)
Place In Mailbox
The Place In Mailbox function will cause the Media Picker to place a cartridge into the Mailbox.
Press ENTER to activate.
The application software can use the Mailbox as a cartridge
input/output element only if it is first enabled. See
Mode Menus, Configuration Menu, Enable Mailbox
of this manual for additional information.
Note
Off-Line
in
Diagnostics Menu
Chapter 4
87