Quantum Scalar 218FC User Manual page 70

LED Label
(Left Indicator Panel)
2.6
(DLT4000, DLT7000)
6.0
(DLT4000, DLT7000)
10.0
(DLT4000)
10.0/15.0
(DLT7000, DLT8000)
20.0
(DLT4000, DLT7000,
DLT8000)
35.0
(DLT7000, DLT8000)
40.0
(DLT8000)
Compress
Density Override
All Right Indicator
Panel LEDs, or,
all Left Indicator
Panel LEDs
60 Operation and Maintenance
Color State
Yellow ON
Blinking
Yellow ON
Blinking
Yellow ON (default)
Blinking
Yellow ON (default)
Blinking
Yellow ON (default)
Blinking
Yellow ON (default)
Blinking
Yellow ON (default)
Blinking
Yellow ON
OFF
Yellow ON
OFF (default)
Blinking
Blinking
Operating Condition
Tape is recorded in 2.6 format.
Tape is recorded in another density. You
selected this density for a write from BOT.
Tape is recorded in 6.0 format.
Tape is recorded in another density. You
selected this density for a write from BOT.
Tape is recorded in 10.0 format.
Tape is recorded in another density. You
selected this density for a write from BOT.
Tape is recorded in 15.0 format.
Tape is recorded in another density. You
selected this density for a write from BOT.
Tape is recorded in 20.0 format.
Tape is recorded in another density. You
selected this density for a write from BOT.
Tape is recorded in 35.0 format.
Tape is recorded in another density. You
selected this density for a write from BOT.
Tape is recorded in 40.0 format.
Tape is recorded in another density. You
selected this density for a write from BOT.
Compression mode enabled. (Compression
available only in 10.0, 15.0, 20.0, and 35.0
density.)
Compression mode disabled.
You selected a density from the front panel.
Density will be selected by the host (automatic).
You are in density selection mode.
A POST error has occurred.