Quantum Scalar 218FC User Manual page 95

The Pos Picker at Slot function is used to position the Media Picker at a particular cartridge storage
slot in preparation to either pick, or place a cartridge from/into the slot. The maximum slot number is
dependent upon the setting of ADJUST SLOT COUNT under the Configuration Menu.
Use LEFT or RIGHT to select the desired field. Select the row or slot using UP or DOWN Press
ENTER to activate.
ss = Slot number (01 – 17, 01 – 16 if ADJUST SLOT COUNT set to 16)
Pos Picker at Mbox
The Pos Picker at Mbox function is used to position the Media Picker at the Mailbox slot in
preparation to either pick a cartridge from the Mailbox, or place a cartridge into the Mailbox.
Press ENTER to activate.
The application software can use the Mailbox as a cartridge
input/output element only if it is first enabled. See
Mode Menus, Configuration Menu, Enable Mailbox
of this manual for additional information.
Pos Picker at Drv
The Pos Picker at Drv function is used to position the Media Picker at a drive in preparation to either
pick a cartridge from the drive, or place a cartridge into the drive.
Use LEFT or RIGHT to select the desired field. Select the row or slot using UP or DOWN. Press
ENTER to activate.
dd = Drive number (01 - 02)
Note
Off-Line
in
Diagnostics Menu
Chapter 4
85