Prepare And Install The Data Cartridges - Quantum Scalar 218FC User Manual

Prepare and Install the Data Cartridges

Barcode Labels
To install the barcode labels, position the label with the numbers upright, as shown in the illustration below,
sliding the label under the ridges on the sides of the cartridge recess.
Write-Protect Switch
1. Set the write-protect switch (see illustration below) on each cartridge to the appropriate position. Use
your finger to push the switch in one of the directions shown in the following illustration.
Write-protected
Barcode Labels
Orange
Indicator
DLT Cartridge Write-Protect Switch
Write-protect
Switch
Write-enabled
Getting Started 9