Firmware Revision - Quantum Scalar 218FC User Manual

and it has not been logically unloaded, an error will occur and an error message will be displayed on the
Operators Panel.
Use LEFT or RIGHT to select the desired field. Select the drive row and drive using UP or
DOWN. Press ENTER to activate.
dd = Drive number (01 - 02)
Close Drive Door
The Close Drive Door function will cause the Scalar Library to close the door of the selected drive. If
the door is already closed the drive door motor will run for a short time.
Use LEFT or RIGHT to select the desired field. Select the drive row and drive using UP or
DOWN. Press ENTER to activate.
dd = Drive number (01 - 02)

Firmware Revision

Provides a record of the internal revision date and number, and internal checksum value of the firmware
for the Main CPU, Motion CPU, Picker CPU, and Servo Controller. This information is vital for
troubleshooting problems.
Press ENTER to list the F/W revision information for the Main CPU.
VV = Major version number (00-99)
vv = Minor version number (00-99)
82 Diagnostics Menu