Powering On The System - Quantum Scalar 218FC User Manual

Powering on the System

Plug the power cord into the back of your Scalar 218FC.
Plug the power cord from the Scalar 218FC into a grounded electrical outlet.
Use caution when plugging the power cord into an electrical outlet.
Hazardous voltages are present in the sockets of the outlet.
Plug the power cord from your host computer into a grounded electrical outlet.
Turn on power to your Scalar 218FC.
Turn on power to the host computer.
The following illustration shows the Operator Panel LCD message displayed when your Scalar 218FC has
completed the boot and initialization process.
With the factory default conditions unchanged, your Scalar
218FC will sign-on as a Scalar 218.
Your Scalar 218FC displays its current internal temperature
(in degrees centigrade). Whenever the internal temperature
meets or exceeds 40º C, an alarm will sound and the
"**HIGH TEMP ALARM**" message will appear on the LCD.
The alarm will quit and the message will be removed from the
LCD when the temperature falls below 40º C.
16 Connecting the Scalar 218FC Library
Notes