Removing Tape Cartridges; Figure 12 Inserting/Removing Tapes - Quantum ACL 4/52 Operator's Manual

Chapter 2 Operating Procedures
Operating Procedures
Figure 12 Inserting/Removing
Tapes
Removing Tape
Cartridges
24
Tape Cartridge
Bar code Label
To remove a tape cartridge:
2
Note: Use the view port to determine whether or not the load port contains
tape cartridges to be removed.
1 When tape cartridges are ready to be removed, press the load port
OPEN button and verify the indicator begins blinking. (It may
require several seconds for the load port door to automatically
open.)
Warning: Mechanical hazards could be exposed when the load port is
partially open or closed. Do not attempt to insert hands or
fingers into the load port opening at any time.
2 Remove the tape cartridge(s) from the load port bin(s).
3 Press the load port CLOSE button.
ACL 4/52 Operator's Guide
Load Port
Opens to Right/
Closes to Left
TA30010d