Diagnostic Tools; Run Site Survey - Polycom SpectraLink 8020 Administration Manual

Diagnostic Tools

Run Site Survey

PN: 1725-36038-001_B.doc
,
Run Site Survey Diagnostics Enabled
tools provided to assist the wireless LAN administrator in evaluating
the functioning of the SpectraLink 8020/8030 Wireless Telephone and
the system surrounding it. Diagnostic Tools are enabled in the Admin
menu.
Site survey is used to evaluate the facility coverage before certifying
that an installation is complete. It can also be used at any time to
evaluate coverage by testing signal strength, to gain information
about an AP, and to scan an area to look for all APs regardless of
SSID. The information available through the site survey includes:
SSID
•
Beacon Interval
•
• Information regarding support of 802.11d, 802.11g, 802.11h and
other 802.11 amendment standards as required
•
Current security configuration
Start the site survey by selecting
The mode starts immediately.
When the test is started, it is by default in "single SSID" mode. When
the soft key is pressed (softkey A) all APs, regardless of SSID, are
Any
displayed and the softkey changes to say
key will revert to the "single SSID" mode and change the softkey back
to .
Any
The display would look like the following for the multiple AP mode.
1 1 1 1 1 1 - 2 2
1 1 1 1 1 1 - 2 2
1 1 1 1 1 1 - 2 2
1 1 1 1 1 1 - 2 2
A n y
and
Syslog Mode
Run Site Survey
. Pressing the
MyID
3 3 4 4 4
3 3 4 4 4
3 3 4 4 4
3 3 4 4 4
D e t l
8
are three diagnostic
from the Admin menu.
soft
MyID
73