Diagnostic Tools; Run Site Survey - Polycom SpectraLink 8020 Administrator's Manual

Diagnostic Tools

Run Site Survey

PN: 1725-36038-001-H.doc
,
Run Site Survey Diagnostics Enabled
tools provided to assist the LAN administrator in evaluating the
functioning of the SpectraLink 8020/8030 Wireless Telephone and the
system surrounding it. Diagnostic Tools are enabled in the
menu.
The option in the Admin menu is a diagnostic tool that
Halt on Error
will cause the handset to stop operating if an error message is
received. Error detail may be shown on the display, captured by the
syslog server, and may also be available for downloading with the
Handset Administration Tool. Unless the error is a fatal one, normal
operation may be resumed by power-cycling the handset.
Site survey is used to evaluate the facility coverage before certifying
that an installation is complete. It can also be used at any time to
evaluate coverage by testing signal strength, to gain information
about an AP, and to scan an area to look for all APs regardless of
SSID. The information available through the site survey includes:
• SSID
• Beacon Interval
• AP information regarding support of 802.11d, 802.11h and other
802.11 amendment standards as required
•
Current security configuration
Start the site survey by selecting
The mode starts immediately.
When the test is started, it is by default in "single SSID" mode. When
the soft key is pressed (softkey A) all APs, regardless of SSID, are
Any
displayed and the softkey changes to say
key will revert to the "single SSID" mode and change the softkey back
to .
Any
and are three diagnostic
Syslog Mode
from the
Run Site Survey
. Pressing the
MyID
8
Admin
menu.
Admin
soft
MyID
103