To Use The Counter Function - JAI GO-2400M-PGE User Manual

GO-2400MC-PGE | GO-2401MC-PGE | User Manual (Ver. 3.0)

To Use the Counter Function

Configure the settings as follows. Three counters can be configured (Counter 0 to 2).
Item
Counter 0 ~ 2 Counter 0 ~ 2
Off
Frame Trigger
Counter 0 ~ 2
Frame Start
Event Source
Exposure Start
Frame Transfer End
Counter 0 ~ 2
Rising Edge (Fixed) or
Event
Falling Edge
Activation
Note: The four counter event signals are always counted up internally on the camera.
Setting Value / Selectable
Range
Select the counter.
Select the counter event signal for which to read the count
value.
Specify the timing at which to count.
- 74 -
Main Functions
Description